Aluminium shopfronts Harrismith businesses order from Coetz™ are made to measure at our workshop in Laser Park, Johannesburg, and measured, delivered and installed on site by MC Automations, our parent company. Shops, clinics, offices, restaurants and showrooms across the Free State can price a framed frontage online before anyone visits site.
This page covers what a frontage includes, what it costs, the doors and glass that suit Harrismith conditions, where we work in the city and how a project runs from 270 km away.
In this guide
What aluminium shopfronts Harrismith include
- Frame: our 44 mm commercial aluminium frame, in fixed bays with transoms (toplights) above the door line where you need a sign band.
- Glass: 6.38 mm clear laminated safety glass as standard, up to 3 000 mm high per pane; toughened, tinted, solar and obscure glass are quoted with the project.
- Doors: single or double hinged doors, a pivot door, or an automatic sliding or swing door.
- Colour: any powder-coat colour, all at the same price, so the frame can match the brand.
- Installation: measured, installed and, for automatic doors, commissioned by MC Automations on site in Harrismith.
Aluminium shopfronts Harrismith prices
Framed frontages are priced per square metre for the aluminium and glass in the online estimator, with hinged doors included in the area. The rate is the same in Harrismith as in Johannesburg; examples, excluding VAT:
| Shopfront | Area | Price, excl. VAT |
|---|---|---|
| 3 000 × 2 400 mm, single hinged door | 7.20 m² | R13 323 |
| 4 000 × 2 700 mm, double hinged doors | 10.80 m² | R19 984 |
| 6 000 × 3 000 mm, double hinged doors | 18.00 m² | R33 306 |
| 4 000 × 2 400 mm, MC-125 automatic sliding door | 9.60 m² | R17 763 + R27 590 operator = R45 353 |
Installation and transport to Harrismith are quoted together by MC Automations after a site measure. Frameless frontages, pivot doors and special glass are quoted per project. See aluminium shopfront cost for what changes the price.
Aluminium shopfronts Harrismith: weather and glass
Harrismith sits below the Platberg on the edge of the Drakensberg: cold winters with frost and occasional snow, and summer thunderstorms with hail.
Cold and hail favour a well-sealed frontage: the gaskets in an aluminium frame keep out cold draughts, laminated safety glass holds together if hail cracks a pane, and an automatic door keeps the shop warm while customers come and go.
Not sure which glass or door suits your site in Harrismith? Send us a few photos of the opening, the street and the direction it faces, and we will recommend the glass and the entrance before MC Automations visits to measure. It costs nothing and saves changing the design later.
Every frontage is glazed in safety glass, as SANS 10400-N requires at entrances and low level; the standard is published by the SABS. See aluminium shopfront glass for every glass option.
Aluminium shopfronts Harrismith: entrance doors
- Automatic sliding doors: the MC-125 automatic sliding door system, R27 590 excluding VAT, with sensors, remotes, battery backup and an electric lock, for openings 1 600 to 6 000 mm wide.
- Automatic swing doors: the MCW-100 automatic swing door operator, from R15 900 excluding VAT, for a hinged door that must stay.
- Pivot doors: aluminium pivot doors from R10 494 excluding VAT, or frameless glass pivot doors quoted per project.
- Hinged doors: single and double aluminium hinged doors, included in the shopfront area.
MC Automations services automatic doors every six months, and the operator carries a 24-month warranty. In Harrismith, see our page on automatic doors Harrismith for servicing and call-outs.
Where we install in Harrismith
MC Automations installs aluminium shopfronts Harrismith-wide, including:
- the Harrismith town centre
- Intabazwe
- the N3 interchange and truck stops
- Tshiame and the industrial areas
- Kestell
- the N5 towards Bethlehem
Aluminium shopfronts Harrismith projects range from units in neighbourhood centres in the town and at the N3 interchange to stand-alone shops on the main roads and offices in business parks. Mall tenants should also read shopfronts for shopping centres.
Businesses we build for in Harrismith
Harrismith is the halfway stop on the N3 between Johannesburg and Durban, so truck stops, fuel stations, restaurants and logistics businesses need busy, hard-wearing entrances, alongside agricultural suppliers, the industrial area at Tshiame and tourism heading for the Drakensberg.
Each type of business has its own guide: retail shopfronts, clinic shopfronts, commercial shopfronts for restaurants and showrooms, office entrance doors, petrol station shopfronts and frameless shopfronts. Inside the building we also install glass partition walls and frameless glass doors.
Choosing aluminium shopfronts Harrismith: a quick checklist
- N3 halfway stop: Busy entrances for truck stops and restaurants.
- Cold and snow: Sealed frames keep draughts out.
- Hail-safe glass: Laminated panes hold together if cracked.
- Keep the heat in: Automatic doors close behind customers.
- Any colour, one price: Match the brand or the building.
- Measured and installed: By MC Automations, on site in Harrismith.
Run through the list before you price the frontage. Most of the cost and almost all of the problems on a shopfront come from three decisions made early: the type of entrance door, the glass, and getting the opening measured properly. Settle those and aluminium shopfronts Harrismith customers order are quick to approve, make and install.
Looking after the frontage
Aluminium needs little care, but a little care keeps it looking new. Wash the frames with mild soapy water and the glass with an ordinary glass cleaner; avoid abrasive pads and strong solvents on the powder coat. Keep the drainage slots at the bottom of the frame clear so rain can run out, and keep the floor track of an automatic door free of grit. Check the door seals and the lock once a year, and book the six-monthly service on any automatic door, so small adjustments are made before they become call-outs.
Why choose Coetz™ in Harrismith
- Published prices: the frontage is priced online before anyone travels to site, so the budget is clear from day one.
- Made in our own workshop: frames are cut, assembled and glazed in Laser Park, not bought in.
- One company from measure to service: MC Automations measures, installs and services the frontage and any automatic door.
- Safety glass as standard: 6.38 mm laminated glass in every pane, not cheap float glass.
- Any colour, one price: match the brand without paying extra.
Because MC Automations installs aluminium shopfronts Harrismith-wide and across the Free State, the same team that measures your opening comes back to fit it, and is the team you call if anything needs attention later.
Approvals in Harrismith
Check with the Maluti-a-Phofung Municipality before changing the frontage of an older sandstone building in the town centre. Shopping centres have their own tenant design rules, so send the centre the elevation drawing from the estimator before ordering.
Aluminium shopfronts Harrismith: how a project runs
- Price it: lay out the frontage in the estimator and download the drawing, or send us your architect’s drawings.
- Site measure: MC Automations measures the opening in Harrismith, checks the floor, the structure and the power for any automatic door.
- Quote: one quote for the frontage, the doors, any operator, transport and installation.
- Manufacture: the frame and glass are made to measure in Laser Park.
- Delivery: the frontage travels about 270 km by road to Harrismith, insured by us in transit.
- Installation: MC Automations installs and commissions it, planned around your trading hours where possible.
More from Coetz™ in Harrismith
We also supply aluminium windows and doors Harrismith, and MC Automations handles automatic doors Harrismith. For the full design process, see custom shopfronts; for Johannesburg and Pretoria, see aluminium shopfronts Gauteng.
Aluminium shopfronts Harrismith: frequently asked questions
How much do aluminium shopfronts cost in Harrismith?
Framed frontages are priced per square metre in the online estimator: a 3 000 × 2 400 mm frontage with a single door is R13 323 excluding VAT for the aluminium and glass. Installation and transport to Harrismith are quoted after a site measure.
Do you install shopfronts in Harrismith?
Yes. MC Automations, our parent company, measures and installs shopfronts in Harrismith and in major cities and towns across South Africa.
Where are the shopfronts made?
In our workshop in Laser Park, Johannesburg, and delivered by road to Harrismith, insured by us in transit.
Which door is best for a Harrismith shop?
For most busy shops, an automatic sliding door. The MC-125 system is R27 590 excluding VAT and includes battery backup and an electric lock.
Can the frame match our brand colour?
Yes. Any powder-coat colour is available, all at the same price.
How high can the glass be?
Shopfront glass is limited to 3 000 mm high per pane.
Coetz™, Unit 2, 84 Ridge Road, Laser Park, Johannesburg. Call 010 412 0062, WhatsApp 076 613 4418 or use our contact page.